ACRYLIC TRANSPARENT TOP COAT VARNISH (SILK MAT) 10+1

ACRYLIC TRANSPARENT TOP COAT VARNISH (SILK MAT) 10+1

DEFINITION
It is a two component, acrylic resin based top coat varnish. Acrylic varnish gives a silky matte appearance to the applied surface. Due to its acrylic structure, it creates a very transparent, hard, elastic and non-yellowing film.

PLACE OF USE
It is designed to be used in interior furniture and decoration works where non-yellowing is required, and for varnishing all kinds of solid and veneered wooden surfaces in the furniture industry.

ADVANTAGES

• Resistant to yellowing,

• Resistant to scratches and impacts

NOTE
Drying times were measured when 40 micron dfk was applied under normal conditions. It should be known that the drying time will increase as the application thickness increases and in cold weather.

APPLICATION INFORMATION

Surface Preparation
The application surface must be free from dust and dirt.

Ambient conditions
Ambient temperature should be between +5°C and +35°C. In applications to be carried out in closed environments, ventilation should be considered.

Preparation of the Mixture
Care should be taken to ensure that the paint to be thinned is at a minimum of 15°C. 19500 Acrylic silk matte Varnish and 19500 Acrylic Hardener should be mixed as 10+1 weight and brought to the application viscosity by adding Green Lack Acrylic Thinner. A homogeneous mixture should be provided by using a mechanical mixer when necessary. Before starting the application, it should be rested for 10-15 minutes.

Application to the Surface
The mixture, which is made ready for application, is applied in 2 or 3 cross coats by air spraying, waiting 30- 45 minutes between coats depending on the desired surface fullness. Depending on the ambient temperature, paste-polish is made in 48 or 72 hours.

Cleaning of Equipment
With acrylic thinner. PACKAGING INFORMATION: A set of 16.5 kg 19500 ACRYLIC TRANSPARENT SILK MATTE VARNISH 10+1; It consists of component A with product code 19500 net 15 kg in a bucket and component B with product code 19500 net 1.5 kg in a gallon.

STORAGE INFORMATION
The material should be stored in a cool and dry place. The life of the material is 1 year when stored properly and in its unopened original packaging.

HEALTH/SAFETY INFORMATION
Comply with the Safety Data Sheet (SDS) prepared in accordance with the EU directives regarding the product.