AQUA GUARD THERMO PAINT-1K

AQUA GUARD THERMO PAINT-1K

DEFINITION
It is a flexible waterproof roof coating modified with special water-based fillers. It is resistant to external conditions. It has high water resistance and has water repellent properties. Its flexibility is extremely high and allows the building to breathe. It is an interior and exterior paint with high ultraviolet resistance. It provides 10-15% energy savings due to its heat reflecting feature thanks to the micro-ceramic and glass beads in the product. It has the ability to reflect back sun rays and UV rays.

CONSUMPTION
1.5-2 kg/m2 double layer application

Usage Areas
• On the roofs of buildings
• Concrete tiles,
• Metal roofs,
• Polyurethane foams,
• Shingle roofs,
• Concrete roofs
• Roofs made of galvanized metal
• Commercial buildings, hotels, office buildings
• Factories.

FEATURES
• Ready to use.
• Single component
• Excellent waterproof
• Practical and easy applicability
• Water based
• Radiant heat impermeable.
• It provides energy saving up to 25-35%.
• Labor costs are low, application is easy and short.
• It prevents the formation of moisture and mold on the wall.
• Dirt-proof, easy to clean.
• It has non-flammability feature.

APPLICATION AND SURFACE PREPARATION
Layers that will reduce adherence such as oil, grease, dirt, paint, cement grout, rust, mold oil, salt bleed should be thoroughly cleaned before application. The surfaces must be clean, sound, free of carrier and free particles. Cracks and rips on the surface should be carefully repaired with repair mortars and the surface should be prepared. The surfaces on which the application will be made are primed in a single layer. Two coats are applied on the primed surface without diluting the product. Application layers should be applied diagonally to each other. The applied surface should not be exposed to frost within 24 hours.

APPLICATION
• It is a ready-made material; Heating does not require thinning.
• It should be applied after the material is mixed very well.
• Gloves must be used during the application.
• It is applied by spraying, brush or roller.
• Final curing takes place in 24 hours.
• At least two coats of application are required.
• The second layer should be applied after at least 12 hours.
• It should not be applied in rainy weather or at temperatures below 5°.

PACKAGING AND CONSUMPTION
18 kg liquid is presented ready to use in plastic packaging.

CLEANING
Tools and equipment are cleaned with water.

SHELF LIFE
It can be stored for at least 12 months in its dry unopened original packages and at temperatures of +5-25 °C. Once opened, use it as soon as possible. Protect from freezing conditions.

WARNING AND PRECAUTIONS
• Do not apply on wet and frozen surfaces.
• This product is not suitable for pressurized waterproofing.
• Newly applied material should not be exposed to rain and frost for 24 hours.
• In applications that will be exposed to sunlight, the thickness should be at least 1 mm.
• Pay attention to the safety signs and warnings on the packaging.
• Adequate ventilation should be provided in the workshops, open flames and high temperatures should be avoided.
• Mix well before application. Do not leave the lid of the package open.
• Avoid application in weather conditions where precipitation is expected and under precipitation.
• The skin should not come into contact with the eyes and mouth, and the application should be made by taking the necessary safety precautions. Avoid applying at temperatures below +10°C and above +35°C, do not try to use frozen material by adding dust and water.