INNOPUR SPORT SELF.LV ATH-200

INNOPUR SPORT SELF.LV ATH-200

Definition
Two-component, polyurethane-based, self-leveling, flexible floor covering for athletics tracks. INNOPUR SPORT PU SELF ATH-200 is a flexible, self-leveling (self-leveling) elastomeric, solvent-free 2-component polyurethane-based flooring material developed for athletics tracks.

USAGE PLACES
INNOPUR SPORT PU SELF ATH-200 is a liquid-applied multi-purpose sports floor covering that creates athletic floors with high impact resistance and durability. INNOPUR SPORT PU SELF ATH-200 can be used for covering flexible floors formed by laying the mattresses produced using rubber granules or by pouring rubber granules in place. It is recommended to use a suitable UV resistant topcoat to increase the chemical resistance and color stability of floors obtained using INNOPUR SPORT PU SELF ATH-200.

APPLICATION
Environmental Conditions Required for Application
✓ Maximum ambient humidity should be 80%-Ambient temperature should be between 10-30°C-It should not be rainy 24 hours before, during and 24 hours after application in open areas.
✓ The ground temperature should be 3 °C above the current dew drop temperature. Ambient temperature
✓ Ask our company for the Ambient Humidity-Dew Dew Temperature table.

If INNOPUR SPORT PU SELF ATH-200 is to be applied on concrete floors
✓ The floor temperature should be between 10-30 °C.
✓ The humidity of the ground concrete should be less than 4%. If necessary, measurement should be made with a suitable device.
✓ New concrete floors must be at least 28 days old.
✓ Breaking strength of ground concrete Min. It should be 1.5N/mm².

To mix up
INNOPUR SPORT PU SELF ATH-200 is 2-component and is used by mixing in ratios of A: B-100:65 (weight). In 2-component polyurethane systems, the homogeneous mixture of A and B components at the recommended mixing ratios is very important for maximum performance. First, component A is mixed and homogenized if there is precipitation. Component B is poured into component A. It is mixed with a mixer of 200-300 rpm for a minimum of 3 minutes. The packaging walls and bottom sides are thoroughly scraped with mixer blades and trowel.

CONSUMPTION
It should be used between 2-2.5 Kg per 1 m² to obtain 2 mm floor covering.

COLOUR
Ral colors

CLEANING
It can be done with Thinner when you are old. It can be mechanically cleaned after curing.

SHELF LIFE
It should be stored in dry conditions between 15-25 ºC in its original packaging. It should not be exposed to direct sunlight. Under these conditions, the shelf life is 1 year.

PACKAGING
A Component 260 Kg barrel
B Component 210 Kg barrel