INNOPUR COURT FLOOR AC-260

INNOPUR COURT FLOOR AC-260

DESCRIPTION
INNOPUR COURT AC-260 CUSHION is an unpigmented sports field substrate material containing special granulometric rubber and 100% high-performance latex binder.

USAGE AREAS
INNOPUR COURT AC-260 CUSHION is applied in 3 to 10 coats over Acrylic Resurfacer. Thus, special granulometric rubber particles form a compressed homogeneous thickness of 1-4 mm. 

SURFACE PREPARATION
Prior to any Tennis Court system application, new hot asphalt surfaces must cure for a minimum of 14-21 days.

SURFACE CONDITIONS
Surfaces where CUSHION is applied must be free from dust, flaking paint layers, oily materials, chemical residues, and similar foreign matter to ensure perfect adhesion.

CONSUMPTION
The maximum dilution ratio of CUSHION is 5:1. 1 kg of product can cover 2 m2 in a single coat. However, consumption varies depending on surface roughness.

Mixing Ratios
CUSHION 50 kg. Water 10 kg. In very hot application conditions, more water can be added.

APPLICATION GUIDE

System Requirements
CUSHION should be applied in a minimum of 2 coats. Each coat of CUSHION provides a more homogeneous and tight CUSHION system. Application of CUSHION over Acrylic Resurfacer is recommended. For more information, see the Acrylic Resurfacer technical data sheet.

Application
INNOPUR COURT AC-260 CUSHION is applied from one end of the floor to the other in parallel coats using a rubber squeegee. If applying in hot weather conditions, water should be sprayed to keep the surface moist. When the first coat is completely dry, the second coat should be applied at a 90-degree angle to the previous one.

Drying and Curing Time
For drying in INNOPUR COURT AC-260 CUSHION application, wait at least 4 hours between coats; under normal weather conditions, a maximum of 2 coats can be applied per day. CLEANING: All tools used in applications can be cleaned with water before drying.

CONSIDERATIONS IN APPLICATION

Weather Conditions
INNOPUR COURT AC-260 CUSHION should strictly not be applied in rainy and humid weather (while raining), and the surface temperature for application must be minimum 14°C and maximum 50°C. Applications should definitely not be made above 60°C.

Indoor applications
High relative humidity, low temperature, and inadequate ventilation in indoor applications may delay drying time. These three factors should be especially considered indoors.