INNOPUR STONE PRIMER PU-1K

INNOPUR STONE PRIMER PU-1K

DESCRIPTION
INNOPUR STONE PU PRIMER -1K is a polyurethane-based, solvent-containing, single-component surface primer that enhances adhesion in cast-type systems for stone carpet coatings.

PRODUCT ADVANTAGES
- Prevents dusting after application.
- Eliminates adhesion problems (reaction degradation) originating from the floor.
- Has high bonding and adhesion strength.
- Resistant to water, moisture, and heat after application.
- Very easy to apply.
- Can be applied between +5 / +30 °C.

APPLICATION AREAS
It is a polyurethane-based floor primer used in indoor and outdoor spaces prior to stone carpet application to prevent dusting of the surface, increase adhesion, and block moisture.

APPLICATION
The floor to be primed must be clean, free of oil and dirt, especially dry, and repaired. INNOPUR PRIMER is applied to the floor using a brush or roller. Curing and drying time is normally 4-6 hours under standard conditions. This period is shortened in hot environments and may be extended in cold environments. After the primer application has dried, the INNOPUR STONE UV RESIN + STONE mixture is applied to the floor.

Mixing
Ready to use. Can be applied without thinning. Special solvent can be used if necessary.

CONSUMPTION
Minimum total consumption: 0.1-0.3 kg/m2

PACKAGING
200 kg steel drum, 15 kg metal bucket