INNOPUR PRIMER PU CRYSTAL-1K

INNOPUR PRIMER PU CRYSTAL-1K

DESCRIPTION
It is a single-component, transparent, non-yellowing primer material. Although developed to enhance the adhesion of INNOP-UR FLOOR PU CRYSTAL-1K to non-porous substrates, it is also highly suitable as a primer for all other products in the INNOPUR series. As a result of the reaction of organosilane in the mixture of solvents and additives with moisture, it coats the entire surface seamlessly, holistically, and homogeneously. It is easily applied with a clean cloth. It primarily cleans the surface to be protected with INNOPUR FLOOR PU CRYSTAL-1K. It dries in a very short time, within 10-15 minutes, making the surface ready for the main membrane application.

APPLICATION AREAS
Application areas as a primer:
• Glassy, glazed tiles
• Glass
• Lightly porous marble

LIMITATIONS
• Should be applied in minimal amounts with a cloth.
• Care should be taken to avoid runs, drips, and pooling.

FEATURES and ADVANTAGES
• Dries in a short time.
• Does not require thinning.
• Does not yellow or fade.
• Easy to apply.

SURFACE PREPARATION
If possible, the surface should be cleaned using pressurized water; oil, grease, fuel, and paraffin residues must be removed, and it should also be completely freed from mold release agents, cement residues, shavings, loose particles, and cured membranes. Surface defects and cracks should be repaired by filling with suitable products. Application: Apply with a clean cloth (as if wiping the surface). Wait 10-15 minutes for it to dry, then apply INNOPUR FLOOR PU CRYSTAL-1K.

Minimum total consumption
0.1 Kg/m2

CLEANING
After cleaning tools and equipment with paper towels, wipe with SOLVENT. Rollers cannot be reused.

PACKAGING
6 kg, 20 kg

SHELF LIFE
Can be stored for a minimum of 12 months in unopened original buckets in dry environments at temperatures between 5°C and 25°C. Material in opened buckets should be used as soon as possible.