INNOPUR FLOOR PU CLEAR GLOSS-1K

INNOPUR FLOOR PU CLEAR GLOSS-1K

DESCRIPTION
It is a single-component, polyurethane-based liquid product with a high solid content. It cures with atmospheric moisture to form a highly durable and elastic film. It features excellent UV resistance and high hydrophobic properties. Due to its aliphatic structure, it does not fade or yellow when exposed to sunlight. Its formulation is based on pure elastomeric, hydrophobic, aliphatic polyurethane resin, which provides the material with excellent chemical, mechanical, and thermal resistance as well as resistance to UV and other natural elements.

APPLICATION AREAS
• Tiles such as marble, ceramics.
• Natural stones.
• Verandas and terraces.
• Wooden surfaces.
• Concrete waterproofing.

ADVANTAGES
• Excellent weather and UV resistance.
• Excellent thermal resistance; the product never softens.
• Maximum service temperature is 80°C; maximum shock temperature is 200°C.
• Can be applied undiluted. However, it can be diluted with a special solvent when necessary.
• Cold resistance: The film maintains its elasticity down to -40°C.
• Excellent mechanical properties.
• Effective chemical resistance.
• Effective in water vapor transmission: Since the film breathes, no moisture accumulation occurs under the layer.

LIMITATIONS
Cannot be applied in thick layers.

APPLICATION INFORMATION

Environmental Conditions
Relative humidity should be at most 80%, and application temperature (ambient and surface) must be between +3°C and +35°C. There should be no rain 24 hours before application in open areas, during application, and 24 hours after application. Substrate temperature must be 3°C above the current dew point temperature. (Please request the Ambient Temperature-Ambient Humidity-Dew Point Table from our company.) Not recommended for unstable substrates. Do not apply in thick coats. Suitable surface types for successful results: Tiles, cement-based roof tiles, concrete, wood, corroded metal, and galvanized steel surfaces.

Surface Preparation
The surface should be cleaned using pressurized water if possible; oil, grease, fuel, and paraffin residues must be removed, as well as mold release agents, cement residues, sawdust, loose particles, and cured membranes. The application surface must be DRY.

Priming
A primer (INNOPUR PRIMER) must be used on non-porous surfaces such as ceramics and marble. Apply the primer with a clean cloth without allowing pooling or running (as if wiping the surface).

Mixing
Mix by hand or with a low-speed electric mixer. Can be applied without thinning. Special solvent can be used when necessary.

Application
As soon as the primer dries (15-20 minutes), apply one or two coats with a roller. The time between coats should not exceed 24 hours.

CONSUMPTION
Minimum total consumption: 0.300 kg/m2

PACKAGING INFORMATION
6 kg, 16 kg, 200 kg

STORAGE CONDITIONS
Can be stored for a minimum of 12 months in unopened original pails in dry environments at temperatures between 5°C and 25°C. Material in opened pails should be used as soon as possible.