AQUA GUARD ANTI HUMIDITY PAINT-1K

AQUA GUARD ANTI HUMIDITY PAINT-1K

DESCRIPTION
A highly effective anti-HUMIDITY and MOLD insulation paint, modified with special chemicals and polymers, developed to eliminate moisture and dampness problems on interior and exterior building walls caused by natural elements.

CONSUMPTION
Minimum total consumption: 0.5 - 0.8 kg/m²

APPLICATION AREAS
• Wet and damp walls,
• Painted or unpainted damp walls,
• Interior and exterior walls,
• Basement walls,
• Surfaces and floors such as plaster, gypsum, concrete, screed,
• Tunnels,
• North facades of buildings,
• Humidity and dampness problems.

FEATURES
• Can be applied to all types of wet, damp, or dry walls, painted or unpainted surfaces. Thanks to its excellent alkali and moisture resistance, it prevents and eliminates moisture and dampness on walls.
• Exceptionally strong adhesion to all types of surfaces; it never peels or blisters, and features high chemical resistance.
• Unaffected by UV, rain, water, and salt.
• Forms a film layer with excellent water resistance on interior/exterior walls, flood-prone areas, basements, garages, or cellars.
• Even if the paint or wall is damp or wet, it adheres firmly to the surface, dries quickly, and provides insulation.
• Unaffected by salt water and salt efflorescence. Thus, it is also used to solve paint blistering issues caused by building flooding.
• While forming a waterproof layer on the surface, it also penetrates the wall structure to dry internal moisture using its special chemical composition.
• Has no harmful side effects on applied surfaces or materials.
• Ready to use.
• Does not require a primer.
• Application surface can be damp, wet, or dry.
• Applicable to all painted or unpainted surfaces.

APPLICATION AND SURFACE PREPARATION
Layers that reduce adhesion—such as oil, grease, dirt, paint, cement laitance, rust, mold release oil, and salt efflorescence—must be thoroughly cleaned before application. Surfaces must be clean, sound, load-bearing, and free of loose particles. Cracks and damaged areas should be carefully repaired with repair mortars. It is a ready-to-use material; no heating or thinning is required. Stir thoroughly before use. Protective gloves must be worn during application. Apply with a brush or roller. Final curing occurs in 5 days.

APPLICATION
• Ready-to-use material; requires no heating or thinning.
• Stir the product thoroughly before application.
• Protective gloves must be worn during application.
• Apply using a brush or roller.
• Final curing is achieved in 5 days.
• At least two coats must be applied.
• Wait at least 12 hours before applying the second coat.
• Do not apply in rainy weather or at temperatures below 5°C.

PACKAGING AND CONSUMPTION
Supplied ready-to-use in 5 kg plastic containers.

CLEANING
Tools and equipment should be cleaned with water.

SHELF LIFE
24 months from the production date when stored in original, unopened, and undamaged packaging.

WARNINGS AND PRECAUTIONS
• The application area must be well-ventilated.
• Newly applied material must be protected from rain and frost for 24 hours.
• Do not apply below 5°C, or in rainy and foggy weather.
• Do not apply to wet or frozen surfaces.
• Pay attention to safety symbols and warnings on the packaging.
• Ensure adequate ventilation in workshops; keep away from open flames and high heat.
• Mix thoroughly before application and do not leave the container lid open.
• Avoid application in rainy conditions or when rain is expected.