AQUA GUARD THERMO PAINT-1K

AQUA GUARD THERMO PAINT-1K

DESCRIPTION
It is a flexible, waterproof roof coating modified with water-based special fillers. It is resistant to outdoor conditions. It features high water resistance and water repellency. Its elasticity is extremely high and allows the building to breathe. It is an interior and exterior paint with high ultraviolet resistance. Provides 10-15% energy savings due to its heat-reflecting properties thanks to micro-ceramic and glass spheres in the product. It reflects solar and UV rays.

CONSUMPTION
1.5-2 kg/m² in two coat applications

APPLICATION AREAS
• Roofs of buildings
• Concrete tiles
• Metal roofs
• Polyurethane foams
• Shingle roofs
• Concrete roofs
• Roofs made of galvanized metal
• Commercial buildings, hotels, office buildings
• Factories.

FEATURES
• Ready to use.
• Single component
• Excellent waterproofing
• Practical and easy application
• Water-based
• Does not transmit radiant heat.
• Provides up to 25-35% energy savings.
• Low labor cost, easy and quick application.
• Prevents moisture and mold formation on walls.
• Stain resistant, easy to clean.
• Flame retardant property.

APPLICATION AND SURFACE PREPARATION
Layers that reduce adhesion such as oil, grease, dirt, paint, cement laitance, rust, form oil, and salt efflorescence must be fully cleaned before application. Surfaces must be clean, solid, load-bearing, and free from loose particles. Cracks and breaks on the surface should be carefully repaired with repair mortars. A single coat of primer is applied to the application surfaces. The product is applied in two coats without dilution on the primed surface. Application coats should be applied crosswise to each other. The applied surface must not be exposed to frost within 24 hours.

APPLICATION
• It is a ready-to-use material; requires no heating or thinning.
• The material should be applied after mixing thoroughly.
• Gloves must be worn during application.
• Applied by spray, brush, or roller.
• Final curing takes place in 24 hours.
• A minimum of two coats must be applied.
• The second coat should be applied at least 12 hours later.
• Should not be applied in rainy weather or at temperatures below 5°C.

PACKAGING AND CONSUMPTION
Supplied in 18 kg plastic packaging ready for liquid use.

CLEANING
Tools and equipment are cleaned with water.

SHELF LIFE
Can be stored for at least 12 months in dry, unopened original packaging at temperatures of +5 to +25 °C. Once opened, use as soon as possible. Protect from freezing conditions.

WARNINGS AND PRECAUTIONS
• Do not apply on wet and frozen surfaces.
• This product is not suitable for pressurized waterproofing.
• Newly applied material must not be exposed to rain and frost for 24 hours.
• In applications exposed to sunlight, the thickness must be at least 1 mm.
• Pay attention to safety signs and warnings on the packaging.
• Adequate ventilation should be provided in workshops, open flames and high temperatures should be avoided.
• Stir thoroughly before application. Do not leave the container cover open.
• Avoid application in expected rainy weather and under precipitation.
• Avoid contact with skin, eyes, and mouth, and apply taking necessary occupational safety measures. Avoid applying at temperatures below +10°C and above +35°C; do not attempt to use frozen material by adding dust and water.